KT produces the JB4 for industrial grade applications including: automotive test instrumentation, braking system deceleration, bridge and building sway and tilt monitoring, industrial and robotic control, land vehicle navigation, subway and high-speed train ride comfort control, and offshore drilling platform motion monitoring.
The integral electronics develops an acceleration-proportional output current providing both static and dynamic acceleration measurement. By use of customer supplied output load resistor, appropriately scaled for the acceleration range of the application, the output current can be converted into a voltage. Especial JB4-03, it s’ operating Temperature Range is -55~180oC.
Features:
1. Tactical navigation grade performance
2. Analog output
3. Field-adjusting range
4. Widely operating Temperature Range
Performance characteristics
S/No |
Parameters |
JB4-01 |
JB4-02 |
JB4-03 |
1 |
Input range (g) |
±30 |
±30 |
±30 |
2 |
Bias (mg) |
<20 |
<40 |
<40 |
2.1 |
One-month composite repeatability (μg) |
<150 |
<250 |
<250 |
2.2 |
Temperature sensitivity (μg/℃) |
<100 |
<150 |
<150 |
3 |
Scale factor (mA/g) |
1.1~1.4 |
1.1~1.4 |
1.1~1.4 |
3.1 |
One-month composite,repeatability (ppm) |
<150 |
<250 |
<250 |
3.2 |
Temperature sensitivity (ppm) |
<200ppm |
<200ppm |
<200ppm |
4 |
Axis misalignment (μrad) |
<15000 |
<15000 |
<15000 |
5 |
Vibration rectification (μg/g2rms) |
<100(50-500Hz) |
<100(50-500Hz) |
<100(50-500Hz) |
6 |
Intrinsic noise (μg-rms) |
<3000(0-10000Hz) |
<3000(0-10000Hz) |
<3000(0-10000Hz) |
7 |
Operating temperature range (℃) |
-55~96 |
-55~125 |
-55~180 |
8 |
Shock (g) |
500 0.5ms |
1000 0.5ms |
1000 0.5ms |
9 |
Vibration peak sine (g) |
25@30-500Hz |
25@30-500Hz |
25@30-500Hz |
10 |
Resolution /threshold (μg) |
<10 |
<10 |
<10 |
11 |
Bandwidth (Hz) |
>300 |
>300 |
>300 |
12 |
Quiescent current per supply (mA) |
<20 |
<20 |
<20 |
13 |
Quiescent power (mW)@ ±15VDC |
<480 |
<480 |
<480 |
14 |
Input voltage |
±13 to ±18 |
±13 to ±18 |
±13 to ±18 |
15 |
Weight (grams) |
55 Nominal , 65 max |
55 Nominal , 65 max |
55 Nominal , 65 max |
16 |
Diameter below mounting surface |
Ф1.0±0.005(inches) |
Ф25mm |
Ф25mm |
17 |
Height-bottom to mounting surface (inches) |
0.617 Max |
0.617 Max |
0.617 Max |
18 |
Case material |
300 series stainless steel |
300 series stainless steel |
300 series stainless steel |